AT&T Cell Booster SS2FII

Confirm the following router/switch settings prior to activating your AT&T Cell Booster:

1. DHCP is ON

  I checked under Gateway\Connection\Status where it shows DHCPv4 Server: Enabled

 

2. MTU size is set to 1500 or higher

  I can't find anywhere to check this in the modem

3. MAC address filtering is either turned off or allows the MAC address of the Cell Booster.

  I see under Gateway\Connection\Wi-Fi that MAC Filtering Mode: Allow-All

  But, I don't see anything for wired connections

4. IPSec Pass-Through is Enabled.

   I don't see anywhere to check this

5. Block Fragmented Packets is Disabled.

  I don't see anywhere to check this