U

Tuesday, July 30th, 2024 4:43 PM

Internet keeps going out- Modem reboot resolves

I thought the problem was my router. Bought a new one and same problem persists. I did a hard reset last night and that didn't fix it either. Modem is a Motorola MB7621 bought new four years ago. It doesn't seem like it gets hot.

Log                                      

 

 Time      Priority                 Description

 Time Not Established  Critical (3)          No Ranging Response received - T3 time-out;CM-MAC=00:**:**:**:a*:*;CMTS-MAC=**:*:*c:*:e*:*;*-QOS=1.0;CM-VER=3.0;

 Tue Jul 30 10:59:36 2024             Critical (3)          Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00: **:**:**:a*: **;CMTS-MAC=00: **:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Tue Jul 30 10:59:36 2024             Critical (3)          Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=00: **:**:**:a*:**;CMTS-MAC=00: **:*c: **:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Tue Jul 30 10:59:36 2024             Critical (3)          16 consecutive T3 timeouts while trying to range on upstream channel 3;CM-MAC=00: **:**:**:a0:**;CMTS-MAC=00:**:*c: **:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Tue Jul 30 10:59:38 2024             Critical (3)          Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**: **:**:a*:**;CMTS-MAC=00:0**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Tue Jul 30 10:59:38 2024             Critical (3)          Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=00: **:**:**:a*:**;CMTS-MAC=00: **:*c: **:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Tue Jul 30 10:59:38 2024             Critical (3)          16 consecutive T3 timeouts while trying to range on upstream channel 2;CM-MAC=00: **:**:**:a*:**;CMTS-MAC=00: **:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0;

 Time Not Established  Notice (6)            Honoring MDD; IP provisioning mode = IPv6

 

 

   Startup Sequence

 

 

   Startup Step

Status

Comment



  

   Acquire Downstream Channel

489000000 Hz

Locked


  

   Upstream Connection

OK

Operational


  

   Boot State

OK

Operational



  

   Configuration File

OK


  

   Security

Enabled

BPI+


  



   Connection Status

 

 

   System Up Time

0 days 00h:35m:03s

 


  

   Network Access

Allowed

 


  



   Downstream Bonded Channels

 


  

   Channel

Lock Status

Modulation

Channel ID

Freq. (MHz)

Pwr (dBmV)

SNR (dB)

Corrected

Uncorrected

1

Locked

QAM256

9

489.0

2.7

42.3

0

0

2

Locked

QAM256

42

405.0

2.8

42.3

0

0

3

Locked

QAM256

43

411.0

2.8

42.5

0

0

4

Locked

QAM256

44

417.0

2.8

42.5

0

0

5

Locked

QAM256

45

423.0

2.8

42.5

0

0

6

Locked

QAM256

1

429.0

2.9

42.6

0

0

7

Locked

QAM256

2

435.0

2.8

42.5

0

0

8

Locked

QAM256

3

453.0

2.5

42.2

0

0

9

Locked

QAM256

4

459.0

2.5

42.1

0

0

10

Locked

QAM256

5

465.0

2.4

42.1

0

0

11

Locked

QAM256

6

471.0

2.4

41.9

0

0

12

Locked

QAM256

7

477.0

2.5

42.2

0

0

13

Locked

QAM256

8

483.0

2.6

42.3

0

0

14

Locked

QAM256

10

507.0

2.7

37.8

0

0

15

Locked

QAM256

11

513.0

2.6

42.4

0

0

16

Locked

QAM256

12

519.0

2.7

42.5

0

0

17

Locked

QAM256

13

525.0

2.6

43.7

0

0

18

Locked

QAM256

14

531.0

2.3

43.2

0

0

19

Locked

QAM256

15

537.0

2.4

43.5

0

0

20

Locked

QAM256

16

543.0

2.4

43.3

0

0

21

Locked

QAM256

17

549.0

2.4

43.5

0

0

22

Locked

QAM256

18

555.0

2.4

43.1

0

0

23

Locked

QAM256

19

561.0

1.6

43.2

0

0

24

Locked

QAM256

20

567.0

2.1

43.2

0

0

Total

 

 

 

 

 

 

0

0



   Upstream Bonded Channels

 


  

   Channel

Lock Status

Channel Type

Channel ID

Symb. Rate (Ksym/sec)

Freq. (MHz)

Pwr (dBmV)

1

Locked

ATDMA

20

5120

35.6

50.3

2

Locked

ATDMA

17

5120

16.3

49.0

3

Locked

ATDMA

18

5120

22.8

49.0

4

Locked

ATDMA

19

5120

29.2

50.0

5

Not Locked

Unknown

0

0

0

0.0

6

Not Locked

Unknown

0

0

0

0.0

7

Not Locked

Unknown

0

0

0

0.0

8

Not Locked

Unknown

0

0

0

0.0

 

Expert

 • 

107.1K Messages

4 months ago

The upstream power is too high and it may be intermittently fluctuating even higher to out of spec levels. That can cause random disconnects, spontaneous re-booting of the modem, speed, packet loss, latency problems, and the un-bonding of channels.

In an effort to try to obtain better connectivity / more wiggle room, check to see if there are any excess/unneeded coax cable splitters in the line leading to the modem that can be eliminated/re-configured. Any splitters that remain should be high quality and cable rated for 5-1002 MHz, bi-directional, and no gold colored garbage from Home Depot, Target, Wal-Mart, etc. Splitters should be swapped with known to be good / new ones to test.

Also check the coax cable for any damage such as cuts, nicks, abrasions, kinks, sharp bends, etc.

If there aren't any unneeded splitters that can be eliminated and if your coax wiring setup can't be reconfigured so that there is a single two-way splitter connected directly off of the drop from the street / pole with one port feeding the modem and the other port feeding the rest of the house/equipment with additional splits as needed and you've checked all the wiring and fittings for integrity and tightness and refresh them by taking them apart then check for and clean off any corrosion / oxidation on the center wire and put them back together again, then perhaps it's best to book a tech visit to investigate and correct.


Good luck with it !

10 Messages

I checked all of the above. All is well.

If a tech comes and my modem is bad, I'm going to get charged for the visit.

Does it seem from the logs I posted that the problem is most likely something other than a bad modem?

10 Messages

@EG​ I just found a splitter that I didn't know was there.

It's on the internet for 99 cents, so I assume it's low quality:

Antronix 2-way Splitter 5-1000MHz    SKU: CMC2002H

Should I change that and see if the problem resloves?

If so, do you have one you can recommend that's easily available online, preferably on Amazon?

10 Messages

4 months ago

My replies above aren't showing as posts.

Expert

 • 

107.1K Messages

4 months ago

99.9 % it's the line, not the modem ! If you don't need the splitter you should remove it completely. You could bypass it for a test and see.

(edited)

10 Messages

4 months ago

Xfinity tech came by on Aug 1st. Spent a few minutes outside only, called me when he was out there and said everything looks fine and that there’s a problem in my neighborhood and nothing has been done about it because not a lot of people in my neighborhood have Xfinity (no way that’s true as I live in a crowded suburban neighborhood in NJ and almost everyone has Xfinity or Fios). He said he’d put a ticket in for it and go up on my pole to check there before he left. I watched him leave almost immediately from my window.

 

Called today and they had another tech come. He seemed surprised that a tech was at my house recently because he found water in my line almost immediately. He just got finished replacing lots of coax a few minutes ago. We’ll see how it goes.

ETA: My tenant upstairs just got home and told me her Fios is out. The tech obviously did something to affect her Fios connection. 🙄

(edited)

Expert

 • 

107.1K Messages

4 months ago

Hope that does it ! Please update your topic again in a few days. Good luck !

10 Messages

4 months ago

Apparently changing coaxial cable from the outside of my house to the inside didn't fix the issue. 

In the title of this thread I wrote that a modem re-boot resolves the issue. I think that may have been a coincidence. Internet goes out and comes back after about 5 minutes on its own. Here are my logs as of a few minutes ago:

Event Log
   Log  
  
 Time   Priority   Description 
 Time Not Established   Critical (3)   No Ranging Response received - T3 time-out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.0;CM-VER=3.0; 
 Time Not Established   Notice (6)   Honoring MDD; IP provisioning mode = IPv6 
 Mon Aug 05 17:23:33 2024    Critical (3)   Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:01:*c:*:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:23:33 2024    Critical (3)   Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:0*:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:23:33 2024    Critical (3)   16 consecutive T3 timeouts while trying to range on upstream channel 2;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:24:08 2024    Critical (3)   Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:24:08 2024    Critical (3)   Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:24:08 2024    Critical (3)   16 consecutive T3 timeouts while trying to range on upstream channel 1;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:24:14 2024    Critical (3)   Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:28:34 2024    Critical (3)   Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Mon Aug 05 17:30:47 2024    Critical (3)   No Ranging Response received - T3 time-out;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.0;CM-VER=3.0; 
 Mon Aug 05 17:31:06 2024    Notice (6)   Honoring MDD; IP provisioning mode = IPv6 
 Wed Aug 07 08:46:15 2024    Critical (3)   Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**:**:*a0:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Wed Aug 07 08:46:15 2024    Critical (3)   Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=00:**:**:**:a*:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Wed Aug 07 08:46:15 2024    Critical (3)   16 consecutive T3 timeouts while trying to range on upstream channel 3;CM-MAC=00:**:**:**:a0:**;CMTS-MAC=00:0*:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Wed Aug 07 08:46:34 2024    Critical (3)   Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=00:**:**:**:a0:**;CMTS-MAC=00:01:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Wed Aug 07 08:50:54 2024    Critical (3)   Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;CM-MAC=00:**:**:**:a0:**;CMTS-MAC=00:0*:*c:**:e*:**;CM-QOS=1.1;CM-VER=3.0; 
 Wed Aug 07 08:51:15 2024    Critical (3)   No Ranging Response received - T3 time-out;CM-MAC=00:**:**:**a0:**;CMTS-MAC=00:**:*c:**:e*:**;CM-QOS=1.0;CM-VER=3.0; 
 Wed Aug 07 08:51:58 2024    Notice (6)   Honoring MDD; IP provisioning mode = IPv6 

   Startup Sequence    
   Startup Step Status Comment

  
   Acquire Downstream Channel 429000000 Hz Locked
  
   Upstream Connection OK Operational
  
   Boot State OK Operational

  
   Configuration File OK
  
   Security Enabled BPI+
  


   Connection Status    
   System Up Time 1 days 17h:52m:23s  
  
   Network Access Allowed  
  


   Downstream Bonded Channels  
  
   Channel Lock Status Modulation Channel ID Freq. (MHz) Pwr (dBmV) SNR (dB) Corrected Uncorrected
1 Locked QAM256 1 429.0 3.3 42.8 3555 1269
2 Locked QAM256 42 405.0 3.2 42.6 3870 1142
3 Locked QAM256 43 411.0 3.2 42.8 4212 988
4 Locked QAM256 44 417.0 3.2 42.8 3675 1240
5 Locked QAM256 45 423.0 3.2 42.8 3671 1025
6 Locked QAM256 2 435.0 3.2 42.7 3188 999
7 Locked QAM256 3 453.0 2.9 42.4 2659 946
8 Locked QAM256 4 459.0 2.8 42.2 2957 883
9 Locked QAM256 5 465.0 2.8 42.2 2644 960
10 Locked QAM256 6 471.0 2.7 42.0 2649 924
11 Locked QAM256 7 477.0 2.8 42.3 2713 1056
12 Locked QAM256 8 483.0 2.9 42.4 2724 967
13 Locked QAM256 9 489.0 3.0 42.4 2491 754
14 Locked QAM256 10 507.0 3.3 37.7 2027 695
15 Locked QAM256 11 513.0 3.2 42.6 1898 937
16 Locked QAM256 12 519.0 3.4 42.8 1924 799
17 Locked QAM256 13 525.0 3.4 43.6 1866 1522
18 Locked QAM256 14 531.0 3.3 44.0 1801 1553
19 Locked QAM256 15 537.0 3.3 43.5 1812 1434
20 Locked QAM256 16 543.0 3.2 43.8 1774 1473
21 Locked QAM256 17 549.0 3.1 43.9 1701 1536
22 Locked QAM256 18 555.0 3.1 44.0 1686 1426
23 Locked QAM256 19 561.0 2.2 43.5 1755 1433
24 Locked QAM256 20 567.0 2.7 43.6 1611 1348
Total             60863 27309


   Upstream Bonded Channels  
  
   Channel Lock Status Channel Type Channel ID Symb. Rate (Ksym/sec) Freq. (MHz) Pwr (dBmV)
1 Locked ATDMA 17 5120 16.3 47.5
2 Locked ATDMA 18 5120 22.8 47.0
3 Locked ATDMA 19 5120 29.2 48.0
4 Locked ATDMA 20 5120 35.6 48.5
5 Not Locked Unknown 0 0 0 0.0
6 Not Locked Unknown 0 0 0 0.0
7 Not Locked Unknown 0 0 0 0.0
8 Not Locked Unknown 0 0 0 0.0

Official Employee

 • 

947 Messages

 

user_uwixj4 Can you please send me a ModMail (https://www.reddit.com/message/compose?to=/r/Comcast_Xfinity) with your first and last name along with your full service address so that I can assist you further?

 

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please, mark a reply as the Accepted Answer.tick

Expert

 • 

107.1K Messages

@user_uwixj4 @XfinityBrianH 

This is not Reddit / Modmail.

To send a direct message (private message) here on this platform;


Click "Sign In" if necessary.
 
Click the "Direct Message" icon  in the upper right corner or https://forums.xfinity.com/direct-messaging  
 
Click the "New message" (pencil and paper) icon.
 
The "To:" line prompts you to "Type the name of a person". Instead, type "Xfinity Support" there.
 
As you are typing a drop-down list appears. Select "Xfinity Support" from that list.
 
An "Xfinity Support" graphic replaces the "To:" line.
 
Type your message in the text area near the bottom of the window.
 
Press the "Enter" key on your keyboard to send it.

See https://comca.st/3KQF8q9 for an example.

[Permission from and credit given to BruceW].

I am not a Comcast Employee.
I am a Customer Expert volunteering my time to help other customers here in the Forums.
We ask that you post publicly so people with similar questions may benefit from the conversation.

Was your question answered? Please mark an Accepted Answer!tick

Expert

 • 

107.1K Messages

4 months ago

You need to keep getting the techs re-involved until things get fixed properly. Bear in mind that if the premises facing techs can not find or fix a problem at your home, it is they who are responsible for escalating it up to their line / network / maintenance dept. techs. The problem may lie beyond your home in the local neighborhood infrastructure somewhere but it is their S.O.P. to start at the home. And if the problem is found to be on their side of the demarcation point, there will not be any charge.


Good luck !

(edited)

10 Messages

4 months ago

Supervisor cam to the house today. Replaced the cable from the pole to the house. I asked him if he saw anything obviously wrong and he didn't. Said the cable had a date of 2019 on it and no obvious bad signs. Gave me his work number and told me to text him if problem persists. We'll see how the next few days goes.

I just noticed the Xfinity employee post from BryanH. If problem persists, I'll text the supervisor that was here today and also contact BryanH. Thanks.

Official Employee

 • 

1.7K Messages

Good afternoon and happy Thursday @user_uwixj4. We appreciate your response letting us know that a supervisor came to your house today to take a closer look at your cable line. I also see that you stated you are going to monitor for a few days. Would you like for us to check in with you in a few days to see how your connection has been? We want to make sure that your issues get resolved properly. 

 

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please, mark a reply as the Accepted Answer.tick
forum icon

New to the Community?

Start Here