My plan is for 150mbps and I'm only getting 20mbps
Are you connecting via Wifi or Ethernet? If Wifi, it's best to switch to an Ethernet cable connection if possible for testing. That would allow you to determine whether the problem is the Wifi signal or the link between your modem or gateway and Comcast's network. Network connection problems that affect both Ethernet and Wifi devices are often due to poor coax connections or damaged coax cable, usually in or near your home. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. If there is an amplifier in the line make sure it's getting power.
downstream:power levels, SNR (or MER), and error countsfor all channels
upstream:power levelsfor all channels
complete event log, if available (Be sure to remove or blot out any MAC addresses. Forum security processing considers them "personal information" and may prevent the event log from posting if these are present.)
Copy and pasted text is preferred over images. Be aware that, if you post any images, your message will be made Private for a time, as all images must be approved by the Forum Moderators before the messages containing them become generally visible.
If you can't find the problem or you'd rather have Comcast take care of it and an employee does not respond to your message here, call them at the phone number on your bill or 1-800-Comcast, or use one of the options on https://www.xfinity.com/support/contact-us/. It's not likely they can fix the problem remotely. If not, insist they send a tech out to identify the cause and correct it.
If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit (approx $100) unless you have their Service Protection Plan ( https://www.xfinity.com/support/articles/service-protection-plan, closed to customers that don't already have it). If the trouble is due to a faulty Comcast rental device or anything outside your home you shouldn't be charged.
Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.
user_cesl1o Thanks for reaching out about getting a lower speed than expected, and we would be happy to help troubleshoot the problem.
Can you send us a direct message with your full name, name of account holder (if different), and service address please?
To send a "Direct Message" to Xfinity Support:
Click "Sign In" if necessary
Click the "Direct Messaging" icon (speech bubble)
Click the "New message" (pencil and paper) icon
The "To:" line prompts you to "Type the name of a person". Instead, type "Xfinity Support" there
- As you are typing a drop-down list appears. Select "Xfinity Support" from that list
- An "Xfinity Support" graphic replaces the "To:" line
Type your message in the text area near the bottom of the window
Press Enter to send it
I am an Official Xfinity Employee. Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership. We ask that you post publicly so people with similar questions may benefit from the conversation. Was your question answered? Please, mark a reply as the Accepted Answer.
The power levels and SNR values posted are OK, but the event log indicates the modem is having trouble staying connected to Comcast's network. Also, regarding the upload speed, note that the MB8600 is not compatible with the new higher upload speeds. See:
Realize that although Comcast calls some devices "Compatible" and some "Recommended", for all but a few devices those designations only mean "compatible/recommended for use with their Internet service", and not necessarily approved for the new upload speeds.
You need one of Comcast's newer rental gateways (XB6, XB7, XB8) or one of the few retail devices shown in the "Next Gen Speed Tier" group with an upload speed rating in the "All Compatible Devices" PDF. Also see the Reddit link, which lists the approved devices as well as other requirements for faster upload speeds. Comcast could make all of this much clearer, but they have chosen not to do so.
Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.
Good evening @user_cesl1o. Congrats on the new modem! Were you able to get it all set up?
I am an Official Xfinity Employee. Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership. We ask that you post publicly so people with similar questions may benefit from the conversation. Was your question answered? Please, mark a reply as the Accepted Answer.
BruceW
Gold Problem Solver
•
26K Messages
4 months ago
Are you connecting via Wifi or Ethernet? If Wifi, it's best to switch to an Ethernet cable connection if possible for testing. That would allow you to determine whether the problem is the Wifi signal or the link between your modem or gateway and Comcast's network. Network connection problems that affect both Ethernet and Wifi devices are often due to poor coax connections or damaged coax cable, usually in or near your home. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. If there is an amplifier in the line make sure it's getting power.
If you want to troubleshoot this yourself, please see Internet Troubleshooting Tips. If you still need help, please post the following information from your modem or gateway (from http://192.168.100.1 or http://10.0.0.1):
Copy and pasted text is preferred over images. Be aware that, if you post any images, your message will be made Private for a time, as all images must be approved by the Forum Moderators before the messages containing them become generally visible.
If you can't find the problem or you'd rather have Comcast take care of it and an employee does not respond to your message here, call them at the phone number on your bill or 1-800-Comcast, or use one of the options on https://www.xfinity.com/support/contact-us/. It's not likely they can fix the problem remotely. If not, insist they send a tech out to identify the cause and correct it.
If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit (approx $100) unless you have their Service Protection Plan ( https://www.xfinity.com/support/articles/service-protection-plan, closed to customers that don't already have it). If the trouble is due to a faulty Comcast rental device or anything outside your home you shouldn't be charged.
Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.
(edited)
2
0
BruceW
Gold Problem Solver
•
26K Messages
4 months ago
The power levels and SNR values posted are OK, but the event log indicates the modem is having trouble staying connected to Comcast's network. Also, regarding the upload speed, note that the MB8600 is not compatible with the new higher upload speeds. See:
And especially see the "All Compatible Devices" link near the bottom of https://www.xfinity.com/support/devices (at the moment it points to https://assets.xfinity.com/assets/dotcom/projects/cix-4997_compatible-devices/2024-07-18_Full-List-of-Compatible-Devices.pdf, but this changes from time to time).
Realize that although Comcast calls some devices "Compatible" and some "Recommended", for all but a few devices those designations only mean "compatible/recommended for use with their Internet service", and not necessarily approved for the new upload speeds.
You need one of Comcast's newer rental gateways (XB6, XB7, XB8) or one of the few retail devices shown in the "Next Gen Speed Tier" group with an upload speed rating in the "All Compatible Devices" PDF. Also see the Reddit link, which lists the approved devices as well as other requirements for faster upload speeds. Comcast could make all of this much clearer, but they have chosen not to do so.
Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.
0
0
user_cesl1o
3 Messages
4 months ago
Okay, I purchased a new compatible modem and I'm still getting only 23MBPS upload speeds
Netgear CM3000
1
0