user_daw312's profile

Contributor

 • 

223 Messages

Monday, September 15th, 2025

Speed issues only at certain times

Hi, I am posting this here in the hope someone from Comcast will address this. I have Comcast 2100/300 service. In short, mostly at night (but sometimes in late afternoon) download speed from the router or a direct connected/ethernet MacBook Pro starts at 2300-2400, then slowly drifts down to 1700-1900. In the morning especially, it is rock solid at 2280-2350 Mbps. To me, this is indicative of congestion or shaping upstream of my house (node/service-group/CMTS side) than to anything on my network.

I am not sure if Comcast employees frequent here or not; I had a long conversation with Comcast, on reddit, and they refused to reply anything other than "we'll send a tech to your house; access will be needed to the cable outlets and the technician does not move furniture. Your services may be interrupted while the technician repairs and verifies the signal before leaving…" They gave no indication they even read or understand what I posted (which I added here below, so you can see for specifics). This is NOT an inside-the-house issue.

Now I have no connectors other than at the demarcation box that they installed outside, and the one into the modem - straight shot, no splitters in the house, cable inspected for nicks/tears/extreme bends, connections tight. As you can probably see, my line is near perfect as relates to power levels, SNRs, lack of errors, and any concerning log entries. I have been tracking detailed modem information for about 2 weeks, but I have 'eyeballed' the power/SNR/log entries daily for a long time.

Anyway - here is my data and my request for some upstream inspection, in the hopes there is support to be had here. Thanks!

======

I’m on the 2100/300 plan with a Netgear CM3000 (DOCSIS 3.1 mid-split, 2.5G port) and an Orbi 970 router (10G WAN). Inside wiring is Cat 6, and both modem and router are current-firmware and recently power-cycled.  

Over the past two weeks or so I have seen time-of-day download slowdowns that weren’t present before. Early mornings are normal (≈2.30–2.35 Gbps), but evenings, and frequently afternoons, speeds fall to ≈1.70–1.90 Gbps whether I test from the router or from a directly wired MacBook Pro—so results track across devices. Upload remains perfect (~350-360 Mbps, over provisioned).  Note, the speed tests always seem to start high - 2300+, maybe even close to 2400 Mbps, then slowly fall to the 1700-1900 range. This seems to indicate to me that provisioning is correct, in that speeds start in the correct range.

Comcast support did assure me the boot file provisioning is correct for my service tier (2100/300).

My RF looks clean and stable: 
• Downstream QAM: +3.5 to +6.2 dBmV, SNR 43.5–44.5 dB (32 channels) 
• Downstream OFDM: Power ~+6.2 dBmV, SNR ~43.4 dB, 0 uncorrectables over 14 days 
• Upstream QAM: 43.3–44.0 dBmV (4 channels) 
• Upstream OFDMA: 38.8 dBmV

• Logs: <5 T3/day, 0 T4, 0 CM-STATUS. PMA profile changes are modest and typically settle on profiles 12+13 (highest throughput).  

Because RF and LAN look healthy and the slowdown is evening-specific, this seems like service-group/CMTS congestion or related capacity constraints. Could you please: 

1. Check node/service-group utilization and packet loss, especially during ~4:30–9:30 pm ET 9/14 since I included speed tests for that time period below; 

2. Review CMTS OFDM profile distribution for my modem and any PMA trims in the same windows (PLC/MAP SNR, profile time in 12/13 vs lower); 

3. Verify my modem’s config file matches the 2100/300 tier with expected over-provisioning and that there’s no unintended shaping;

4. Confirm CCAP/backhaul for this service group isn’t saturated or alarmed; and 

5. Run a PNM check for intermittent ingress/CPE leg issues that appear only under load.  

For reference, here are sample results (all wired; MBP=MacBook Pro): 

• September 14 –

4:33 pm: 1.98 Gbps (MBP) 
6:45 pm 1.84 (MBP) 
8:12 pm: 2.14 (router)  
8:18 pm 1.83 (router) 
8:21 pm 1.71 (router) 
8:34 pm 1.75 (router)  
9:26 pm 1.72 (MBP) 

1:21 pm: 2.30 Gbps

• September 15 –

5:48–5:50 am: 2.17–2.35 Gbps (router; 3 tests) 
6:44 am: 2.30 Gbps (MacBook Pro)  

These tests were all to the local Comcast site, less than 1 mile away.  

If it helps, I can provide additional timestamped tests to multiple third-party servers to rule out test-server load. Please let me know if you need MAC address, CMTS, or service-group IDs to correlate.  Thanks for taking a look—I appreciate any next steps to mitigate congestion (e.g., re-segmentation, capacity augments) if that’s what you see.

Oldest First
Selected Oldest First

Official Employee

 • 

2.4K Messages

1 day ago

Hi there, @user_daw312 Thank you for taking the time to reach out regarding your speed concerns. Since it's been a few days since you last posted are you still experiencing speed issues? If so, please don't hesitate to reach back out so we can troubleshoot further.-Richard

Contributor

 • 

223 Messages

Yes it still happens in busy times on the network. The problem sure seems to be  time-of-day only: mornings consistently deliver ~2.3 Gbps (matching my provisioned 2100 tier), but evenings or other busy times, when you can imagine lots of usage, drop to as low as 1.7–1.9 Gbps sustained. That’s below plan speeds, not just below over-provisioned speeds.

Another time was last Sunday afternoon -1 PM - 4 PM EDT -  during NFL/Ravens game on broadcast. IMHO this is the classic signature of service-group/node utilization. If you look at my info above, my modem stats are pristine; I wish someone could check upstream, if diagnostics show issues at the tap/node (which don’t require me to be home), or verify CMTS/CCAP backhaul utilization, Node/service-group utilization, or other ideas I am sure you guys have if I can get past the people who just say "we will roll a truck and check out your house". It just seems to need some tuning during heavy load times. Do you see anything at all in what I posted above, to give cause for concern in the house? I can provide other info if needed, I have been logging almost everything my Netgear CM3000 makes available for the last 18 days or so, daily.

Thanks for the reply!

Official Employee

 • 

2.4K Messages

Thank you, @user_daw312 I do apologize for the inconvenience. The reason why a technician is recommended, is if the issue is outside your home which it sounds like it is, then the technician who is the only that can would escalate the issue to our outside maintenance team that works on service issues outside the customers home.-Richard

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please, mark a reply as the Accepted Answer.tick

Contributor

 • 

223 Messages

FYI you can see the variation even today (below). Only twice is it above the advertised speed for my service, 2100 Mbps. There is no doubt in my mind the tech will come out when speeds are fine, and with the status of the signals/power etc. inside the home, he will conclude there is no issue - wasting his time but also wasting mine in getting off from work.

Have you looked at the data I posted about my current power/SNR/logs? Do you see anything that's a concern, or do you want to ask me to provide anything else that you wonder about which could be the problem? Doesn't the data align that this is an issue of congestion or tuning problem upstream? Why is it so hard to get anyone from Xfinity to acknowledge this, and deal with it? How hard is it to just check your logs/diagnostics/etc. in this specific area at times I have posted, and see if there is a problem?

It's Xfinity's job to fix this, not mine to try and arrange my work schedule to be here, and have a tech say "Yep - house network looks great". There's also a good chance he'll come at a time when the speeds are good - he'll say, "I don't see a problem here." That's why someone needs to look at logs/diagnostics etc for the times I have reported, to see what happened.

Xfinity decides whether to fix and provide speeds that they advertise. Please fix this. Xfinity can do that if they want to, it's their equipment and they have full access to it. If that level of stubbornness continues, that may be what gets me to switch ISPs after 30+ years. No sense paying for this if I don't get what I paid for - and don't make it my problem that it gets fixed.

Date Download (Mbps)
9/17/25 19:00 1998.11
9/17/25 18:59 1258.05
9/17/25 18:59 1885.93
9/17/25 14:50 2060.96
9/17/25 14:50 2019.96
9/17/25 14:38 2099.23
9/17/25 12:20 2095.06
9/17/25 12:19 2061.79
9/17/25 7:27 2255.42
9/17/25 7:26 2190.80
9/17/25 7:25 1841.29

Official Employee

 • 

2.8K Messages

 

user_daw312 - Thank you for your feedback and allowing us the oppurntunity to assist. If you could please send a direct chat message with your full name and complete service address to “Xfinity Support”, I'd be happy to look into this with you. To do so, click on the chat icon located at the top right of this forum's page.


Here are the detailed steps to direct message us:

• Click "Sign In" if necessary

• Click the "Direct Message” icon (upper right corner of this page)

• Click the "New message" (pencil and paper) icon

• Type "Xfinity Support" in the to line and select "Xfinity Support" from the drop-down list

• Type your message in the text area near the bottom of the window

• Press Enter to send your message

 

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please, mark a reply as the Accepted Answer.tick

Expert

 • 

113.4K Messages

2 hours ago

@user_daw312 @XfinityThomasA 

Please circle back here and post any possible solutions for the issue here in these open public forums so that all readers here may benefit from the exchange / info. This is in keeping with the spirit for which these public help forums were originally intended. Thank you.

Contributor

 • 

223 Messages

Thanks @EG . Unfortunately, they won't do anything without checking over the house. So I thanked them for their time.

"Unfortunately the next step we have would be to schedule an in home tech because all the signals we can check remotely are testing good"

forum icon

New to the Community?

Start Here